80% percent Jig for AR15 and LR308 DPMS style 80% lower receivers
80% percent jig for AR15 and LR308 DPMS style 80% lower receivers.

80% percent jig for AR15 and LR308 DPMS style 80% lower receivers  This jig takes the guess work out of drilling the hammer pin hole, trigger pin hole, selector hole, and the internal area pocket.  Includes the master plate, two side plates, 3 top plate guides, screws for mounting the master plate to side plates, and screws for the top guide plates.  The side plates mount into the front pivot pin and the rear takedown pin holes and are held by the master plate for perfect alignment.  The top guide plates mount to the master plate as a guide for cutting of the internal pocket area.  Plates are marked for the order of operation and depth for each step.

This is by far the easiest Jig set ever put together for 80 percent lower receivers.

We now have them for both the AR15 and LR308 type lower.

YES, We have the determination letter from BATFE making these LEGAL 80% receivers.

 

This is the AR15 style Jig set pictured above..

!

AR15 80% lower receiver Jig set

AR15 80% lower receiver jig set.

AR15 jig set for 80 percent lower receivers.

80 percent lower receiver link HERE

LR308 80% lower receiver Jig Set

AR10 jig set.

AR10 jig set for 80 percent DPMS LR308 style 80% lower receivers.

80 percent lower receiver link HERE

AR15 and AR10 80% lower receiver jig set

AR15 and LR308 80% lower receiver jig combination set
AR15 and LR308 80% lower receiver jig set for milling and drilling of our 80% lower receivers